Electric Operating Table DT12-B |
|
 |
| DT12-B serves as a multi-purpose operation table,
suitable for thoracic abdominal surgery, cerebrial surgery, ENT,
gynecology and obstertrics as well as urology surgery. |
| |
Summary of
features and properties:
1.Integrated hydraulic system
which ensures the reliability of the table.
2.Superior stainless
steel housing for the basement and support system of the table makes
cleaning and sterilization an easy matter. Ergonomic design provides the
table with a clear cut. All mattress are cast and made from polyester
rubber.
3.The back section of the table is movable, on which an
elevator can be fit for the operation on kidney or gall-bladder.
4.The
surfaces of the table are made of plexi glass. By putting the x-ray film
container between the upper and bottom deck of the table, radiographic
examination can be carried out without moving the patient.
5.All the
clamps for fixing the accessories are detachable and easy to use
.
6.With the head rest and the double-sheet arm rest (optional
accessories), the cerebral surgery and lateral surgery are
convenient. |
| Specification: |
¡¡ |
| Table
board: |
270¡Á480mm(L¡ÁW) |
| Height
of
table: |
minimum of height 650mm adjustment
over 220mm |
| The
lateral adjustment : |
-15¡ãto +20¡ã |
| Back
section: |
adjustment up to +75¡ã |
| Head
section: |
upward up to 35¡ã |
| |
downward up to 90¡ã |
| Leg section abductable |
up to 180¡ã(90¡ãeither side) |
| down position |
up to 90¡ã detachable. |
| Foot section level with or vertical to table
board |
detachable |
| Elevator range of kindney bridge: |
>80mm |
| Power Supply: |
220V,50HZ |
| Electric motor: |
singel phase ,defferential pace,370W
1400rpm | |
| |
| Optional
accessories
Double deck arm rest
Neurosurgery head
rest |
 | |
Mandatory
accessories:
1.Anaesthesia screen
2.X-ray film
cassette
3.Kidney bridge
4.Side supports
5.Shoulder
supports
6.Knee crutches
7.Arm rest
8.Body
strap
9.Mattress
10.Cushions |
|
¡¡ |
Electric Operating Table DT12-D |
 |
|
DT12-D serves as a
multi-purpose operation table, suitable for thoracic abdominal surgery
cerebrial surgery, ENT, gynecology and obstertriocs as well as urology
surgery. |
| Table board: |
2060x550mm(LxW) |
| Min height of table board: |
550mm |
| Elevating range: |
300mm |
| Longitudinal shift of table board: |
200mm |
| Head section: |
-90¡ã ~ 35¡ã, detable |
| Should section: |
-25¡ã ~ 35¡ã |
| Back section: |
-15¡ã ~ 75¡ã |
| Leg section: |
-90¡ã ~ 0¡ã, detable |
| Trendelenburg adjustment: |
0¡ã ~ 20¡ã |
| Antitredelenburg adjustment: |
0¡ã ~ 15¡ã |
| Lateral tilt of table board: |
Left ward: 0¡ã ~ 15¡ã |
| ¡¡ |
Right ward:0¡ã ~
15¡ã | | |
|
Summary of Features and
Properties:
1.The operating table is controlled by
microprocessor. Two control panels are available, which is suitable for
operation from different position. Locking keys are designed to avoid
false operating.
2.Integrated hydraulic system adopts
imported components, which guarantees low noise feature and ensures the
reliability of the talbe.
3.Extra low position has been
designed especially for cerebral and ophthaim surgery. Doctor is able to
take a seat druing operation.
4.The whole table's top can
be moved forward, backward, leftward and rightward, which permits maximum
full body use for a C-am,X-ray unit.
5.Extra width of
table meets today's olinical requirement.
6.DT12-D is
divided into five sections. including head section, shoulder section, body
section, pelvis Section and Leg section. The surfaces of these sections
are made of radiolucent material. By putting the x-ray film container
between the upper and bottom deck of the table, radiographic examination
can be carried out without moving the patient.
7.The
movement of all sections are controlled by electric-driven hydraulic
controlled system, except for Head Section and Leg Section, which is made
manually.
8.Shoulder section and body section can be
elevated, which make surgeries on gallbladder and kidney much
easier.
9.The maneuverability and stability table base is
fiexible and reliable.
10.With wide range of accessories,
the table is suitable for all kinds of operation.
11.The whole
unit is in accordance with the National Safety Standard for medical
electric appliance.
12.The operating table is compact in
structure and new in design. |
|
Optional
accessories:
Anaesthesia screen
Knee crutches
Body
Support
Mattress
Cassette Support
Body strap
|
 |
| ¡¡ |
|
¡¡ ¡¡ |
Electric Operating Table DT12-E |
.gif) |
|
Specitication:
Tabletop length 2000mm
Tabletop width 520mm
Tabletop height adjustment range 740~1120mm
Trendelenburg ¡À25¡ã
Lateral tilt ¡À15¡ã
Head section adjustment range Upward 0~20¡ã, Downward 0~30¡ã, detachable
Back section adjustment range Upward 0~25¡ã, Downward 0~25¡ã
Seat section adjustment range Upward 0~75¡ã, Downward 0~40¡ã
Leg section adjustment range Downward 0~85¡ã, Abduction 0~180¡ã
Foot section adjustment range Upward 0~10¡ã, Downward 0~70¡ã |
|
¡¡ |
|
Technical data:
Total length of tabletop:2000mm
Width of tabletop:520 mm
Elevation of tabletop:740¡ª1120 mm
Trendelenburg movement:¡À25¡ã
Lateral movement:¡À15¡ã
Head section upward:¡Ý25¡ã Head section downward:¡Ý25¡ã
Back section upward:¡Ý75¡ã Back section downward:¡Ý40¡ã
Leg section upward:¡Ý70¡ã Leg section downward:¡Ý90¡ã
Power:AC 220 V, 50 Hz
Storage battery:24V, 24Ah
Standard accessories:
- Anaesthesia screen 1 pce
- Body support 2 pcs
- Knee crutch 2 pcs
- Arm rest 2 pcs
- Body strap 1 pce
- Clamps 7 pcs
Optional accessories:
- double deck sheet arm rest
- multipurpose head rack
- orthopedic tractor
- simple head rest
- accessories trolley
- X-ray film cassette holder |
|
¡¡ ¡¡ |
Electric Operating Table DT12-F |
 ¡¡ |
|
DT-12F electrical operating table is a
new version of high level electrical operating table, which adopts a
unique stand column supporting the tabletop at the head end. This
structure makes the tabletop locate in the place outside the area
covered by supporting column, and provide a maximum space for the X-ray
examination. The tabletop of DT-12F is well contrived to meet the
neurosurgery demand, by designation of four sections with wide angle
turnings, which enables the table to form most kinds of postures
required in the sophisticated neurosurgery. This is the first choice of
a operating table for neurosurgeons
DT-12F contains enormous functions
including one key resetting, two control panels--wire remote controller
and emergency table mount controller, and in addition, it has provided
an options for additional wireless controller.
DT-12 F integrates two independent
hydraulic and control system, and is either run by DC (as medical safety
power source) or by AC power (as emergency standby power), while all the
key parts are sourced from international first rate companies for high
reliability and leading technology. Equipped with different accessories,
the DT-12F is also possible for all purpose of surgeries in different
levels of hospitals
¡¡ |
|
Technical data:
Total length of tabletop:2000mm
Width of tabletop:520 mm
Elevation of tabletop:740¡ª1120 mm
Trendelenburg movement:¡À25¡ã
Lateral movement:¡À15¡ã
Head section upward:¡Ý25¡ã Head section downward:¡Ý25¡ã
Back section upward:¡Ý75¡ã Back section downward:¡Ý40¡ã
Leg section upward:¡Ý70¡ã Leg section downward:¡Ý90¡ã
Power:AC 220 V, 50 Hz
Storage battery:24V, 24Ah
Standard accessories:
- Anaesthesia screen 1 pce
- Body support 2 pcs
- Knee crutch 2 pcs
- Arm rest 2 pcs
- Body strap 1 pce
- Clamps 7 pcs
Optional accessories:
- double deck sheet arm rest
- multipurpose head rack
- orthopedic tractor
- simple head rest
- accessories trolley
- X-ray film cassette holder |
|
¡¡ |